---

AKAI
ALESIS
CLAVIA
E-MU
ENSONIQ
KORG
KURZWEIL
ROLAND
WALDORF
YAMAHA



HARDWARE

AARDVARK
ECHO
EDIROL
FATAR
MIDIMAN
TERRATEC

ROLAND VS-CDR-II TURBO FACTS

The Roland VS-CDRII CD Recorder System is a complete hardware solution that
provides users the ability to burn audio CDs and perform data backups
directly from the VSR-880. You can now record, edit, mix, apply effects,
and master to CD entirely in the digital domain. The VS-CDRII also functions
as a CD-ROM player and writer for Macintosh and IBM compatible computers.
Features include:

• Burn CDs directly from selected VS-Workstations
• CD archiving of song data provides an inexpensive backup medium
• Includes Adaptec Toast™ CD-R software for Macintosh and Easy CD Creator™ CD-R software for PC platforms

*All trademarks are the property of their respective owners

Setup

Use the following procedure to set up a the VSR-880 for use with the VS-CDRII:

1. 1. With all equipment turned off, connect either SCSI port of the VS-CDRII to the SCSI port of the VSR-880.
2. 2. If you are connecting only the VS-CDRII to your VSR-880, make sure the termination switch on the back of the VS-CDRII is set to the "on" position (switch to the left) and the mode switch is set to the "off" position (switch to the right). If you are using multiple SCSI devices, connect them to the CD-R drive and terminate the last device in the chain.
3. 3. Set the ID numbers of each SCSI device so that they do not conflict (VS-series workstations default to SCSI ID #7).
4. 4. Turn on the power in the following order: VS-CDRII, VSR-880, then audio equipment.

Note: The current VS-CDRII requires the VSR-880 to have at least version 1.013. If you need to update your VSR, you can obtain these files along with updating instructions from the Roland US Website (www.rolandus.com) or by calling our Product Support department at 323-890-3741

Writing an Audio CD

The VS-CDRII CD recording system allows you to write song data to CDR or CD-RW. Use the following procedure to create an audio CD on the VSR-880:

1. Insert a blank CD or CD-RW into the VS-CDRII.
2. Press CD-RW until "CDR CD-R Write?" is displayed. Press YES.
3. "Store Current?" is displayed. Press NO if the current song is a demo song, or if the Song Protect feature is active, otherwise press YES.
4. "CDR Disk at Once?" is displayed. Press YES.
5. Use CURSOR LEFT and CURSOR RIGHT and the CH EDIT buttons to select the tracks in the song you want written to CD.
6. Press PARAMETER RIGHT. "CDR CD Speed" is displayed. Use the TIME/VALUE dial to select the desired speed at which the song will be written to disc, then press YES.
7. "Sng Write + Finish Sure?" is displayed, press YES.
8. "Sng CD Trk OK?" is displayed, press YES.
9. "Obey Copyrights?" is displayed. Press YES twice. Writing to the CD-R disc begins.
   
   

Backup to CD

You can archive songs on your VSR-880 to CDR or CD-RW. This is a great low-cost way to save your material for future use. Use the following procedure to create a data backup CD on the VSR-880:

1. Insert a blank CD or CD-RW into the VS-CDR II.
2. Press CD-RW several times until "CD-R Backup?" is displayed.
3. Press YES. "STORE Current?" is displayed. Press YES or NO.
4. "CDR Bak=" is displayed. Use the TIME/VALUE dial to select the song you wish to back up. If you wish to back up all songs on the drive partition, select "all."
5. Press PARAMETER RIGHT. "+Verify=" appears. Use the TIME/VALUE dial to select "On."
6. Press PARAMETER RIGHT. "CD Speed=" is displayed. Use the TIME/VALUE dial to select the speed at which the CD is written. Press YES.
7. The song data is now being backed up. If the VS needs additional CDs to store the data, "Insert disc #2" appears in the display. Insert a second blank disc and press YES.