---

AKAI
ALESIS
CLAVIA
E-MU
ENSONIQ
KORG
KURZWEIL
ROLAND
WALDORF
YAMAHA



HARDWARE

AARDVARK
ECHO
EDIROL
FATAR
MIDIMAN
TERRATEC

BOSS DS-330 TURBO FACTS

The perfect sound module to supplement a digital piano or MIDI studio,
the desktop DS-330 Dr.Synth offers 156 CD-quality sounds with onboard
digital effects and complete tone editing.

Initializing

1. Hold down the REVERB and SPLIT buttons while powering-up.
2. Press the up arrow/YES button.

Playing the Demo Song

1. Hold down the DRUMS and ((¥)) buttons while powering-up.
2. Press the up arrow/YES button.
3. Press the down arrow/NO button to stop the demo song.
4. Press EXIT to return to single play mode.

Selecting an instrument in single mode

1. Simply press any of the 16 tone bank buttons to select a instrument group of your choice.
2. Upon selecting a bank, use the NUMBER up and down buttons to select individual instruments.
3. Depending upon the instrument, you can press the VALUE/VARIATION up and down buttons to select variation tones.
4. Any of these sounds can be heard by pressing the ((¥)) button.

Selecting a drum kit

1. Press the DRUMS button.
2. Use the VALUE/VARIATION up and down buttons to select any of the 8 drum kits.
3. The sounds in each kit can now be played directly from the 16 instrument buttons, which are now drum pads.
4. exit DRUMS mode, press the DRUMS button.

Creating a split patch

1. Select Piano 1-1 by pressing the PIANO button.
2. Press the SPLIT button.
3. Now, any note below F3 will be Acoustic Bass 5-1 and the upper part will be Piano 1-1.
4. To alter the split point or change the lower instrument, press the LOW/SUB> button and continue pressing it to go through the parameters.

Creating a layer patch

1. Select Piano 1-1 by pressing the PIANO button.
2. Press the DUAL button.
3. Now, Piano 1-1 will be layered with Strings 7-1.
4. To change the layer instrument and its level, press the LOW/SUB> button and continue pressing it to go through the parameters.

Fattening the sound

1. Select Piano 1-1 by pressing the PIANO button.
2. Press the FAT button.
3. Playing a note now, will actually trigger two notes Ð the one played and the octave below it.

Changing the default patch

1. Select Piano 1-1 by pressing the PIANO button.
2. Press the NUMBER up button to select E.Piano 2 1-6.
3. At this point, the "6" should be blinking. Press the PIANO button again.
4. Press the ORGAN button and then go back to the PIANO bank. It should register as E.Piano 2 1-6.

Creating a multitimbral setup

1. Press the UTILITY button until you see SINGLE Mode.
2. Use the VALUE/VARIATION up button to select MULTI Mode.
3. Press EXIT.
4. You will see the Part/MIDI channel displayed on the lower-right of the screen.
5. To change Parts, press the PART (CH) up and down buttons.
6. Instruments can be selected for each Part by pressing the bank and number buttons.
7. To change MIDI channels for a given Part, press the PART EDIT button until you see Part:Ch, and use the VALUE/VARIATION up and down buttons to select any of the 16 MIDI channels.
8. Press EXIT to return normal Multi play mode